The Herrnhuter accumulator-battery holder is suitable for the illumination of 13 cm stars (A1e, A1b, I1) and only for the interior, it has a convenient timer function.
With this battery holder with timer function you can either a 13cm star zb. the lemon star of Edition 2019 or illuminate up to three miniature stars in 8cm at the same time.
The only prerequisite for this, the stars are all equipped with LED bulbs.
No LED bulb in your star yet?
No problem, here you will find the right LED bulb.
- Rechargeable battery holder with timer function (6h)
- Color white
- 4 rechargeable batteries – AA, 1.2V, 2600mAh, rechargeable
- incl. USB-C charging connection with USB-C cable
- No more cables on the housing – 2 connection sockets for the lighting unit of the star are integrated directly in the housing
- built-in holder for hanging
- New switch and better operation
- much better case
additional information:
- suitable for illuminating 1 star – A1e, A1b or I1 or 3 miniature stars
- Lighting can thus be self-sufficient from the power grid
- Burn time with quality batteries approx. 80 hours
- only suitable for indoor use
- Charging time for completely discharged batteries is approx. 7 hours using a 5V/1A USB power pack
- The rechargeable battery holder can be operated both independently from the mains and with a permanently plugged-in mains charging connection
- The device can also be used with normal, non-rechargeable batteries
- Caution: normal batteries must not be charged!
length Timer function:
From power on on “Timer”, the power supply runs for about 6 hours. After that, the star goes out. After another 18 hours, the battery holder will then re-activate for 6 hours, i. the next day at the same switch-on time.
- suitable for illuminating 1 star – A1e, A1b or I1 or 3 miniature stars
- Lighting can thus be self-sufficient from the mains
- only suitable for use in the interior
- with high quality batteries lasts about 80h
- LED bulb NOT included – If you still use your star with a normal light bulb, it must be replaced with an LED bulb before using the battery holder with a timer
Note:
The use of the Herrnhuter battery holder with timer function may only be done with LED!
-300x390.jpg)
